lsk slider lsk Foshan lsk linear guide rail spot price lsk offer legal Ting lsk linear guide features are: use of linear slide as a linear guide, due to the friction linear slide ways of rolling friction, not only to reduce the coefficient of friction sliding guide Citation 1/50, dynamic friction and static friction also becomes very small gap, so when the machine is running, there will be no slip phenomenon can be achieved μm level positioning accuracy. Taiwan production (12) Traditional slide, the inevitable effect will be caused due to the oil film countercurrent kinematics accuracy is bad, and because sports Insufficient lubrication, resulting orbit contact surface wear, seriously affecting the accuracy and rolling guide wear is very small, so machine for a long time to maintain accuracy. friction when moving the linear slide is very small, just a small driving force to make bed machine running, especially in the bed platform works by running back and forth regularly, more significantly reduced Machine power loss amount. because of its heat generated by friction is small, suitable for high-speed operation due to the special linear guideway beam system design, which can withstand up, down, left and right direction load, unlike the slide guided in the direction parallel to the contact surface can withstand the lateral load is light, easy to cause the machine to run bad precision. assembly stage as long as milling or grinding bed rails of the mounting surface and follow the recommended steps for the rails, sliders specific torque respectively fixed on the machine table, that is able to reproduce the high-precision machining. traditional slide shall be scraping on orbit, both cumbersome and time-consuming, and once the machine precision is bad, it must be once again scraping. linear slide with interchangeability, respectively replace the slider or even a linear slide rail set, the machine can regain the high precision guided sliding guide if insufficient lubrication will direct metal contact surfaces causing friction losses bed units, and slide the guide to ensure sufficient lubrication is not easy, you need the appropriate position in the bed platform drilling oil. linear slide nozzle device already on the slider, you can directly grease gun into the oil, but also put special oil tubing pipe connector to automatic oil machine lubrication.